Table of Contents
Advertisement
5-10 Onboard Indicators
LAN LEDs
The Ethernet ports (located beside the
VGA port) have two LEDs. On each
port, one LED flashes to indicate activ-
ity while the other LED may be green,
amber or off to indicate the speed of
the connection. See the table on the
right for the functions associated with
the connection speed LED.
IPMI Dedicated LAN LEDs
An additional Dedicated IPMI LAN is
also located on the I/O backplane.
The amber LED on the right indicates
activity, while the green LED on the
left indicates the speed of the connec-
tion. See the table at right for more
information.
Onboard Power LED (LE1)
An Onboard Power LED is located at
LE2. This LED Indicator is lit when
the system is on. Be sure to unplug
the power cable before removing or
adding any components. See the table
on the right for more details.
BMC Heartbeat LED
A BMC Heartbeat LED is located at
LEDM1 on the serverboard. When
D1 is blinking, BMC is functioning
normally.
Chapter 5: Advanced Serverboard Setup
(Connection Speed Indicator)
LED Color
Off
Green
Amber
Link LED
IPMI LAN Link LED (Left) &
Activity LED (Right)
LED
Link (Left)
Activity (Right)
Onboard PWR LED Indicator
LED Color
Off
Green
Green:
Flashing
Quickly
Green:
Flashing
Slowly
BMC Heartbeat LED
Color/State
Green:
Blinking
5-23
JLAN1/2 LED
Definition
10 Mb/s, 100 Mb/s or no
connection
10 Gb/s (X10DRi-T only)
1 Gb/s
IPMI LAN
Activity LED
Status
Definition
Green: Solid
100 Mb/s
Amber: Blinking
Active
LED Settings
Status
System Off (PWR cable
not connected)
System On
ACPI S1 State
ACPI S3 (STR) State
Status
Definition
BMC: Normal
Advertisement
Table of Contents
