Table of Contents
Advertisement
S
S
UPER
ERVER 6028R-TR/TRT User's Manual
1-2
Serverboard Features
The SuperServer 6028R-TR/TRT is built around the X10DRi-/X10DRi-T, a dual pro-
cessor serverboard based on the Intel® PCH C612 chipset and designed to provide
maximum performance. Below are the main features of the X10DRi-/X10DRi-T. (See
Figure 1-1 for a block diagram of the chipset).
Processors
The X10DRi-/X10DRi-T supports single or dual Intel E5-2600 (V3) Series (Socket
R3) processors in LGA 2011 sockets. Please refer to our web site for a complete
listing of supported processors (www.supermicro.com). Note that with only a single
processor installed (in the CPU1 socket), PCI-E slots 4~6 will not function.
Memory
The X10DRi-/X10DRi-T has sixteen DIMM slots that can support up to 1 TB of
ECC registered/unbuffered DDR4-2133/1866/1600/1333 memory. Please refer to
Chapter 5 for details on installing memory.
SATA
A SATA controller is integrated into the chipset to provide a ten-port SATA 3.0
subsystem, which is RAID 0, 1, 10 and 5 capable. Six ports are supported by the
Intel PCH: I-SATA0-5 (I-SATA 4 and 5 are colored yellow to indicate that they have
embedded power to support SATA DOMs) and four are supported by the Intel SCU
(S-SATA0-3).
PCI Expansion Slots
The X10DRi/X10DRi-T has three PCI-E 3.0 x16 and three PCI-E 3.0 x8 expansion
slots. Note that the PCI slots are controlled by the CPU so some slots may not be
available when two CPUs are not installed on the board at the same time. See the
serverboard layout in Chapter 5 for details.
I/O Ports
The I/O ports include one COM port, a VGA (monitor) port, four USB ports, two
Ethernet LAN ports (10 Gb ports on the X10DRi-T and 1 Gb ports on the X10DRi)
and a dedicated IPMI LAN port.
1-2
Advertisement
Table of Contents
