Table of Contents
Advertisement
F.
SCREW
1
Note: this figure is for illustrative purposes only. Always install servers to the bot-
tom of a rack first.
Installing the Chassis into a Rack
1. Extend the outer rails as illustrated above.
2. Align the inner rails of the chassis with the outer rails on the rack.
SCREW
3. Slide the inner rails into the outer rails, keeping the pressure even on both
screw the handles the
outer rails for secure
sides. When the chassis has been pushed completely into the rack, it should
purpose if necessary
click into the locked position.
4. Optional screws may be used to secure the to hold the front of the chassis to
the rack.
Note that the figure above is for illustration purposes only. Always install servers to
the bottom of the rack first.
Figure 2-3. Installing the Rack Rails
Slide rail mounted equipment is not to be used as a shelf or a work space.
Chapter 2: Server Installation
COMPLETE
2-7
ABLECOM
DATE:2008/08/14
REV:2
Advertisement
Table of Contents
