S
S
UPER
ERVER 6028R-TR/TRT User's Manual
6-4
Drive Bay Installation/Removal
Accessing the Drive Bays
You do not need to access the inside of the chassis or remove power to replace or
swap SATA drives. Proceed to the next step for instructions. You must use standard
1" high, SATA drives in the system.
DVD-ROM: For installing/removing the DVD-ROM drive, you will need to gain ac-
cess to the inside of the server by removing the top cover of the chassis. Proceed
to the "DVD-ROM Installation" section later in this chapter for instructions.
Note: Enterprise level hard disk drives are recommended for use in Supermicro
chassis and servers. For information on recommended HDDs, visit the Supermicro
Web site at http://www.supermicro.com/products/nfo/files/storage/SAS-1-Com-
pList-110909.pdf
Figure 6-2. Removing System Cooling Fans
6-4