Xerox VersaLink B405DN User Manual page 146

Paper and Media
To load paper in Trays 1–4:
1. To remove the tray from the printer, pull out the tray until it stops, lift the front of the tray slightly,
then remove it.
2. Adjust the paper length and width guides as shown.
3. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
This procedure separates any sheets that are stuck together and reduces the possibility of jams.
4. Load paper into the tray with the print side face up.
− Load hole-punched paper with the holes to the left.
− For 1-sided printing, load letterhead paper face up with the top of the paper toward the back of
the tray.
− For 2-sided printing, load letterhead and pre-printed paper face down with the top edge going
into the printer.
146 Xerox VersaLink
®
User Guide
B405 Multifunction Printer
®