Lenovo ThinkSystem SN550 V2 Reference page 163

Messages and codes reference
Table of Contents

Advertisement

3. Update UEFI firmware to the latest version.
4. If the problem persists, collect Service Data logs.
5. Contact Lenovo Support.
• FQXSFMA0029I: The PFA of DIMM [arg1] has been deasserted after applying PPR for this DIMM.
[arg2]
Severity: Info
User Action:
Information only; no action is required.
• FQXSFMA0030K: Intel Optane PMEM DIMM [arg1] Percentage Remaining is less than [arg2]% and
still functioning.
Severity: Warning
User Action:
Complete the following steps:
1. Check the current Intel Optane PMEM DIMM health status in one of the following ways:
a. Run PMEM test under LXPM diagnostic. Look for "Percentage Remaining" of spare blocks.
b. Check for "Remaining Life" of spare blocks on the XCC Web GUI.
2. Back up data.
• FQXSFMA0031K: Intel Optane PMEM DIMM [arg1] has reached 1% remaining spares block and
still functioning.
Severity: Warning
User Action:
Complete the following steps:
1. Check the current Intel Optane PMEM DIMM health status in one of the following ways:
a. Run PMEM test under LXPM diagnostic. Look for "Percentage Remaining" of spare blocks.
b. Check for "Remaining Life" of spare blocks on the XCC Web GUI.
2. Back up data.
3. Check if the PMEM meets warranty terms.
a. If the PMEM meets the warranty terms, contact Lenovo Support for PMEM replacement.
b. If the PMEM does not meet the warranty terms, order a new comparable PMEM through an
authorized Lenovo reseller.
4. Collect Service log and contact Lenovo support to schedule PMEM replacement.(Note: Unless
otherwise specified in other agreements or contract terms, parts beyond their warranty terms and/or
parts that have reached their maximum usage limitations do not qualify for warranty service.)
• FQXSFMA0032M: Intel Optane PMEM DIMM [arg1] has no remaining spares block.
Severity: Warning
User Action:
Complete the following steps:
1. Back up data.
2. Check the current Intel Optane PMEM DIMM health status in one of the following ways:
a. Run PMEM test under LXPM diagnostic. Look for "Percentage Remaining" of spare blocks.
.
159
Chapter 3
UEFI events

Advertisement

Table of Contents
loading

This manual is also suitable for:

7x16

Table of Contents