Lenovo ThinkSystem SN550 V2 Reference page 101

This message is for the use case when an implementation has detected potential power capping when
configuration exceeds maximum power limit.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Power
SNMP Trap ID: 164
CIM Prefix: PLAT CIM ID: 0534
User Action:
Information only; no action is required.
• FQXSPPW0122J: CMM firmware update required for SN550 V2 support.
This message is for the use case when an implementation has detected CMM firmware update required
for SN550 V2 support.
Severity: Warning
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Power
SNMP Trap ID: 164
CIM Prefix: PLAT CIM ID: 0522
User Action:
Complete the following steps:
1. 1.Update the CMM firmware to version 2.70 or later
2. 2.If the issue persists, Contact Lenovo Support for assitance.
• FQXSPPW2001I: [PowerSupplyElementName] has been removed from container
[PhysicalPackageElementName].
This message is for the use case when an implementation has detected a Power Supply has been
removed.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: PLAT CIM ID: 0085
User Action:
Information only; no action is required
• FQXSPPW2002I: [PowerSupplyElementName] has returned to OK status.
This message is for the use case when an implementation has detected a Power Supply return to normal
operational status.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Power
SNMP Trap ID: 4
CIM Prefix: PLAT CIM ID: 0087
.
Chapter 2 XClarity Controller events
97