Table of Contents
Advertisement
This message is for the use case when a Redundancy Set has transitioned from Non-redundant:
Insufficient Resources.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Redundant Power Supply
SNMP Trap ID: 9
CIM Prefix: PLAT CIM ID: 0811
User Action:
Information only; no action is required.
• FQXSPPW2118I: The current chassis configuration is now compatible to support for PMEM
operation.
This message is for the use case when an implementation has detected the current chassis configuration
is now compatible to support for PMEM operation.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Power
SNMP Trap ID: 164
CIM Prefix: PLAT CIM ID: 0441
User Action:
Information only; no action is required.
• FQXSPPW2120I: The current PSU in the chassis is now compatible with ThinkSystem SN550 V2.
This message is for the use case when an implementation has detected the current PSU in the chassis is
now compatible with ThinkSystem SN550 V2.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Power
SNMP Trap ID: 164
CIM Prefix: PLAT CIM ID: 0441
User Action:
Information only; no action is required.
• FQXSPPW2122I: Minimum CMM firmware level has been met for SN550 V2 support.
This message is for the use case when an implementation has detected Minimum CMM firmware level has
been met for SN550 V2 support.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Power
SNMP Trap ID: 164
CIM Prefix: PLAT CIM ID: 0523
User Action:
Information only; no action is required.
102
ThinkSystem SN550 V2 Messages and Codes Reference
Advertisement
Table of Contents
