Table of Contents
Advertisement
• FQXSPUN2023I: Sensor [SensorElementName] has deasserted the transition to non-recoverable.
This message is for the use case when an implementation has detected that the Sensor transition to non-
recoverable has deasserted.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Other
SNMP Trap ID: 50
CIM Prefix: PLAT CIM ID: 0531
User Action:
Information only; no action is required
• FQXSPUN2030I: Device [LogicalDeviceElementName] has been removed from unit
[PhysicalPackageElementName].
This message is for the use case when an implementation has detected a Device was removed.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0537
User Action:
Information only; no action is required
• FQXSPUN2050I: The RAID controller in PCI slot [arg1] is no longer in critical status.
This message is for the use case when an implementation has detected a Sensor transition to less severe
from critical.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Other
SNMP Trap ID: 50
CIM Prefix: PLAT CIM ID: 0523
User Action:
Information only; no action is required
• FQXSPUP0002I: A firmware or software change occurred on system
[ComputerSystemElementName].
This message is for the use case when an implementation has detected that the Firmware or Software
Changed.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0438
User Action:
.
Chapter 2
XClarity Controller events
131
Advertisement
Table of Contents
