Pairing (Enabling) The Ir Remote To A Specific Nvr (Optional) - HIKVISION HWN-2104H-4P User Manual

Batteries (2×AAA) must be installed before operation.
The IR Remote is set at the factory to control the NVR (using default Device ID# 255) without any
additional steps. Device ID# 255 is the default universal device identification number shared by the
NVRs. You may also pair an IR Remote to a specific NVR by changing the Device ID#, as follows:

Pairing (Enabling) the IR Remote to a Specific NVR (optional)

You can pair an IR Remote to a specific Hikvision NVR by creating a user-defined Device ID#. This
feature is useful when using multiple IR Remotes and NVRs.
On the NVR:
Go to General > More Settings.
Type a number (255 digits maximum) into the Device No. field.
On the IR Remote:
Press the DEV button.
Use the Number buttons to enter the Device ID# that was entered into the NVR.
Press Enter button to accept the new Device ID#.
Network Video Recorder User Manual
16