HIKVISION HWN-2104H-4P User Manual page 51

You can edit the IP address, protocol, management port, and other information of the IP
camera to be added.
If the IP camera to add has not been actiavated, you can activate it from the IP camera list on the
camera management interface.
(Optional) Check the checkbox of Continue to Add to add other IP cameras.
Click Add to add the camera. The successfully added cameras are listed in the interface.
Refer to the following table for the description of the icons
Icon Explanation
Edit basic parameters of the
camera
The camera is disconnected;
you can click the icon to get
the exception information of
camera.
Play the live video of the
connected camera.
Upgrade the connected IP
camera.
For the added IP cameras, the Security status shows the security level of the password of camera:
strong password, weak password and risk password.
Network Video Recorder User Manual
Security Level of IP Camera's Password
Description of Icons
Icon Explanation
Add the detected IP camera.
Delete the IP camera
Advanced settings of the
camera.
Show the security status of
the camera to be
Security active/inactive or the
password strength
(strong/medium/weak/risk)
50