HIKVISION HWN-2104H-4P User Manual page 21

POWER
1
ON/OFF
Network Video Recorder User Manual
• To Turn Power On:
- If User Has Not Changed the Default NVR Device ID# (255):
1. Press Power On/Off button (1).
- If User Has Changed the NVR Device ID#:
1. Press DEV button.
2. Press Number buttons to enter user-defined Device ID#.
3. Press Enter button.
4. Press Power button to start device.
• To Turn NVR Off:
- If User Is Logged On:
1. Hold Power On/Off button (1) down for five seconds to display
the "Yes/No" verification prompt.
2. Use Up/Down Arrow buttons (12) to highlight desired
selection.
3. Press Enter button (12) to accept selection.
- If User Is Not Logged On:
1. Hold Power On/Off button (1) down for five seconds to display
the user name/password prompt.
2. Press the Enter button (12) to display the on-screen keyboard.
3. Input the user name.
4. Press the Enter button (12) to accept input and dismiss the on-
screen keyboard.
5. Use the Down Arrow button (12) to move to the "Password"
field.
6. Input password (use on-screen keyboard or numeric buttons
(3) for numbers).
7. Press the Enter button (12) to accept input and dismiss the on-
screen keyboard.
8. Press the OK button on the screen to accept input and display
the Yes/No" verification prompt (use Up/Down Arrow buttons (12)
to move between fields)
9. Press Enter button (12) to accept selection.
User name/password prompt depends on NVR is configuration. See
"System Configuration" section.
20