Setting A Document; About Documents That Can Be Set - Oki MC563 MFP User Manual

Setting a Document

This chapter describes how to set the document on this machine.
•

About Documents That Can be Set

• Setting in the ADF
• Setting on the Document Glass
About Documents That Can be Set
• About Where to Set a Document
Set a document in the ADF or on the document glass when copying, scanning, or
faxing.
• ADF
Scannable size
A4, A5, A6, B5, B6, Letter, Legal 13/13.5/14, Executive, Statement, 8.5 SQ, Folio
Paper capacity 50 sheets (80 g/m
Paper weight 60 to 105 g/m
• Document glass
Scannable size
A4, A5, A6, B5, B6, Letter, Executive, Statement, 8.5 SQ
Document thickness
Up to 20 mm
Duplex scan is not available for A6.
For documents on which adhesives, ink, or correction fluid is used, make sure that they have completely dried before
setting.
• About Documents That Cannot be Set in the ADF
You cannot set the following documents in the ADF. Set the document on the
document glass.
• Documents with holes or tears
• Documents folded or damaged
• Documents with fold lines or badly curled, or rolled documents
• Damp documents
• Documents that are stuck together due to static electricity
• Carbon-backed documents
• Cloth, metal sheets, OHP films
• Stapled, clipped, taped documents or documents with sticky notes
• Documents that are pasted each other, or documents with glue
• Glossy documents
• Coated documents
- 77 -
2 ) or maximum rise of 5 mm (0.2 inches)
2 (16 to 28 lb)
3. Basic Operations