Table of Contents
Advertisement
If the "Do you want to Set-up wireless?" message appears, press the
time)], and then press the
(OK) button.
2
Press the
(SETTING) button.
3
Press the
button once to select [Admin Setup] and press the
4
Enter the administrator password on the administrator password entry screen,
and then press the
(OK) button.
The factory default administrator password is "999999". If the administrator password is
changed, enter the updated password.
5
Press the
or
button repeatedly to select [Network Menu] and press the
button.
6
Check that [Network Setting] is selected, and then press the
7
Press the
button repeatedly to select [Wireless(AP Mode) Setting] and
press the
button.
8
Check that the screen displays the "Cannot be used simultaneously with
wireless (infrastructure)." message for several seconds and [Enable] is
selected on the [Please enable/disable wireless (AP mode)] screen. Press the
(OK) button.
9
Press the
button to select [Manual Setup] on the [Please set wireless (AP
mode)] screen, and then press the
10
Check the [SSID] and [Password] of the machine.
11
Enter the [SSID] and [Password] that you checked in step 10 to connect the
machine and your wireless device.
12
Press the
button repeatedly until the top screen is displayed.
button to select [No (Do not show next
button.
button.
button.
- 52 -
2. Setting Up
Advertisement
Table of Contents
