Cause
The output port of the printer driver is
Select the output port for connecting
incorrect.
the LAN cable or USB cable.
The machine is processing data from
Wait until printing is complete.
another interface.
[Receiving data timeout] is displayed
Press the
on the operator panel and the
on the operator panel, select [Admin
machine does not print.
Setup] > [Print Setup] > [Print menu]
> [Printer Adjust] > [Timeout Injob],
and then select a longer time. The
factory default setting is 40 seconds.
If the job is not printed with "Received
invalid data" displayed, the selected
emulation language may not match
this machine (model). Make sure that
the printer driver you use supports
this model of the machine.
Solution
Reference
-
-
(SETTING) button
-
- 158 -
9. Troubleshooting