[Remote1 Mode]; [Function Button]; [Lens Calibration] - Panasonic PT-MZ770 Operating Instructions (Functional Manual)

[LB/W SERIES]
[VX500 SERIES]
[EZ570 SERIES]
[VW431D]
6) Press the <ENTER> button.
f The confirmation screen is displayed.
7) Press qw to select [OK], and press the <ENTER> button.

[REMOTE1 MODE]

Set the <REMOTE 1 IN> terminal.
1) Press as to select [REMOTE1 MODE].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT]
[USER]
[F/W SERIES]
f Proceed to Step 3) when [USER] is selected.
3) Press the <ENTER> button.
4) Press as to select one from [PIN2] to [PIN8], and press qw to switch the setting.

[FUNCTION BUTTON]

Set the function of the <FUNCTION> button on the remote control.
1) Press as to select [FUNCTION BUTTON].
2) Press the <ENTER> button.
f The [FUNCTION BUTTON] screen is displayed.
3) Press as to select a function.
[DISABLE]
[SUB MEMORY]
[SYSTEM SELECTOR]
[DAYLIGHT VIEW]
4) Press the <ENTER> button.

[LENS CALIBRATION]

Detect the lens shift limit value of the projector, and automatically set the home position.
1) Press as to select [LENS CALIBRATION].
2) Press the <ENTER> button.
f The confirmation screen is displayed.
3) Press qw to select [OK], and press the <ENTER> button.
f To cancel, select [CANCEL].
f The lens moves up, down, left, and right to detect the lens shift limit value, and automatically set the home
position.
f The lens stops to complete the lens calibration.
Note
f [PROGRESS] is displayed in the menu during lens calibration. The operation cannot be canceled during calibration.
122 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
LB3 series, LB2 series, LB1 series, ST10 series, LB90 series, LW80NT series, LB80 series, LB78
series, LB75 series
VW435N series, VW440 series, VW430 series, VX505N series, VX510 series, VX500 series, VW330
series, VX400NT series, VX400 series, VX41 series
EZ570 series, EW630 series, EW530 series, EX600 series, EX500 series
VW431D series
Uses pin assignment of the <REMOTE 1 IN> terminal in standard setting.
Use this item when changing the setting of the <REMOTE 1 IN> terminal. (x page 219)
Uses the <REMOTE 1 IN> terminal setting compatible with the F/W series.
Disables the <FUNCTION> button.
Displays the sub memory list. (x page 135)
Switches the [SYSTEM SELECTOR] setting. (x page 89)
Switches the [DAYLIGHT VIEW] setting. (x page 88)