Table of Contents
Advertisement
Chapter 5 Operations — Projecting with MEMORY VIEWER input
Note
f When the recorded number of pixels is smaller than the maximum number of display dot
aspect ratio.
f When the recorded number of pixels is larger than the maximum number of display dot
ratio.
f Order of the playback follows the display order set in the [NETWORK/USB] menu → [MEMORY VIEWER] → [SORT] (x page 147).
Also in the cases where still image and movie files both exist in the same folder, they are played back according to the [SORT] setting.
f The operating guide at the bottom of the playback screen can be erased by setting the [NETWORK/USB] menu → [MEMORY VIEWER] →
[GUIDE] (x page 147) to [OFF].
f When switching the input to [MEMOERY VIEWER] while [AUTOPLAY] is set to [ON], automatic playback starts.
f Playback ends and the Memory Viewer screen returns when the contents list is distributed using the "Multi Monitoring & Control Software"
during playback. To resume the playback of still images, perform the playback operation after the distribution of contents list is completed.
*1 The maximum number of display dot for each product is as follows.
PT-MZ770: 1 920 x 1 080
PT-MW730: 1 280 x 800
Playing back movies
This section describes the procedure using an operation example on the Memory Viewer screen in thumbnail
view.
Playback on the Memory Viewer screen in list view can be performed with the same procedure except for the file
selection.
RF
Example of display during fast-forward playback (x10 speed)
When automatic playback is enabled
This section describes the operation method when the [NETWORK/USB] menu → [MEMORY VIEWER] →
[AUTOPLAY] (x page 147) is set to [ON].
In this case, all movie files in the same folder are played back automatically.
1)
Press asqw to select a file to be projected first from the thumbnails, and press the <ENTER>
button.
f Playback starts in the full-screen display.
f Press the <ENTER> button during playback to pause playback. Press it again to resume playback from the
position where the playback has been stopped.
f After playback ends, playback of the next file starts.
f Press w during playback to perform the fast-forward playback. The speed is increased every time w is
pressed. (3 levels)
f Press q during playback to perform the rewind playback. The speed is increased every time q is pressed.
(3 levels)
f Press a during playback to play back the file being played back from the start. (cue)
f Press w while paused to play back the next file skipping the file being played back.
f Press q while paused to go back and play back the previous file.
2)
Press the <AUTO SETUP/CANCEL> button.
f Automatic playback ends and the Memory Viewer screen (thumbnail view) returns.
190 - ENGLISH
FF
PLAY FROM BEGINNING
ENTER
PLAY
, it will be displayed enlarged maintaining the
*1
, it will be displayed reduced maintaining the aspect
*1
MENU
MENU
CANCEL
RETURN
Status display
Time bar
Operation guide
Advertisement
Table of Contents
