Table of Contents
Advertisement
2)
Press the <ENTER> button.
f The [SHUTTER SETTING] screen is displayed.
3)
Press as to select [STARTUP].
4)
Press qw to switch the item.
[OPEN]
[CLOSE]
Using the shutter function
Image and audio is turned off when the projector is not used for a specific time.
1)
Press as to select [SHUTTER SETTING].
2)
Press the <ENTER> button.
f The [SHUTTER SETTING] screen is displayed.
3)
Press as to select [SHUTTER].
4)
Press the <ENTER> button.
f Press the <MENU> button or the <RETURN> button to clear.
Note
f The power indicator <ON (G)/STANDBY (R)> will blink slowly in green while the shutter function is in use (shutter: closed).
f To output audio while the shutter function is in use (shutter: closed), set the [PROJECTOR SETUP] menu → [AUDIO SETTING] → [IN
SHUTTER] to [ON].
[P-TIMER]
Set and operate the presentation timer function.
Setting the mode
1)
Press as to select [P-TIMER].
2)
Press the <ENTER> button.
f The [P-TIMER] screen is displayed.
3)
Press as to select [MODE].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[COUNT UP]
[COUNT DOWN]
Setting the countdown timer
1)
Press as to select [P-TIMER].
2)
Press the <ENTER> button.
f The [P-TIMER] screen is displayed.
3)
Press as to select [TIMER].
4)
Press qw to set the time.
f The time can be set from 1 minute to 180 minutes in one-minute interval.
f The factory default setting is 10 minutes.
Note
f [TIMER] can be set when [MODE] is set to [COUNT DOWN].
Chapter 4 Settings — [DISPLAY OPTION] menu
The projector goes into projection mode with the shutter function disabled (shutter: opened) when the
power is turned on.
The projector goes into projection mode with the shutter function enabled (shutter: closed) when the
power is turned on.
Displays the elapsed time from when the count is started.
Displays the remaining time against the time set in [TIMER].
ENGLISH - 111
Advertisement
Table of Contents
