Table of Contents
Advertisement
1)
Press as to select [SYSTEM SELECTOR].
2)
Press the <ENTER> button.
3)
Press as to select a system format.
f Available system formats vary depending on the input signal.
Terminal
<VIDEO IN> terminal
<RGB 1 IN> terminal, <RGB 2
IN> terminal
<HDMI 1 IN> terminal, <HDMI
2 IN> terminal, <DIGITAL
LINK/LAN> terminal
4)
Press the <ENTER> button.
Note
f For details of the types of video signals that can be used with the projector, refer to "List of compatible signals" (x page 220).
f This may not function properly for some connected external devices.
90 - ENGLISH
Chapter 4 Settings — [PICTURE] menu
Select [AUTO], [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N], [SECAM], or [PAL60].
Select [AUTO] normally. ([AUTO] will automatically determine from [NTSC], [NTSC4.43], [PAL],
[PAL-M], [PAL-N], [SECAM], or [PAL60].)
Switch the setting to the appropriate TV signal format.
480/60i, 576/50i, or 576/50p
signal
640 x 480/60 or 480/60p
signal
Other moving image signals
480/60i, 576/50i, 480/60p, or
576/50p signal
Other moving image signals
System format
Select [RGB] or [YC
C
].
B
R
Select [640x480/60], [480/60p YC
Select [RGB] or [YP
P
].
B
R
Select [AUTO], [RGB], or [YC
C
B
Select [AUTO], [RGB], or [YP
P
B
C
], or [480/60p RGB].
B
R
].
R
].
R
Advertisement
Table of Contents
