How To Use The Buttons - Kelvinator KSV35CRH User Manual

How to use the buttons

3
ON/OFF
1
MODE
TEMP
FAN
SLEEP FRESH
SELF
TURBO
CLEAN
Auto operation
Ensure the unit is plugged in and power is available.
The OPERATION indicator on the display panel of the
indoor unit starts hing.
1. Press the MODE button to select Auto.
2. Press the UP/DOWN button to set the desired temperature.
The temperature can be set within a range of 17°C–30°C
in 1°C increments.
3. Press the ON/OFF button to start the air conditioner.
NOTE:
1. In the Auto mode, the air conditioner can logically choose the
mode of Cooling and Fan by sensing the difference between
the actual ambient room temperature and the setting
temperature on the remote controller.
2. In the Auto mode, you can not adjust the fan speed. It has
already been automatically controlled.
3. If the Auto mode is not comfortable for you , the desired mode
can be selected manually.
4
ON/OFF
1
MODE
TEMP
3
FAN
SLEEP FRESH
SELF
TURBO
CLEAN
Cooling/Fan operation
Ensure the unit is plugged in and power is available.
1. Press the MODE button to select COOL or FAN mode.
2. Press the UP/DOWN buttons to set the desired temperature.
The temperature can be set within a range of 17°C–30°C in 1°C
increments.
3. Press the FAN button to select the fan speed in four steps-
Auto, Low, Med, or High.
4. Press the ON/OFF button to start the air conditioner.
2
SHORT
CUT
TIMER
ON
TIMER
OFF
FOLLOW
LED
ME
2
SHORT
CUT
TIMER
ON
TIMER
OFF
FOLLOW
LED
ME
NOTE: In the FAN mode, the setting temperature is not displayed
in the remote controller and you are not able to control the room
temperature either. In this case, only step 1, 3 and 4 may be
performed.
3
ON/OFF
1
MODE
TEMP
FAN
SLEEP FRESH
SELF
TURBO
CLEAN
Dehumidifying operation
Ensure the unit is plugged in and power is available. The
OPERATION indicator on the display panel of the indoor unit starts
hing.
1. Press the MODE button to select DRY mode.
2. Press the UP/DOWN buttons to set the desired temperature.
The temperature can be set within a range of 17°C–30°C in 1°C
increments.
3. Press the ON/OFF button to start the air conditioner.
NOTE: In the Dehumidifying mode, you can not adjust the fan
speed. It has already been automatically controlled.
2
SHORT
CUT
TIMER
ON
TIMER
OFF
FOLLOW
LED
ME
How to use the buttons
11