Table of Contents
Advertisement
22. Put the clutch drum in the thread holes in the
gearbox housing to lock in position. Use a gear drive
removal tool to remove the gear drive. Refer to
Servicing tools on page 11 .
23. Push the gear drive out of the ball bearing and
remove the clutch drum from the gearbox housing.
24. Remove the ball bearing from the gearbox housing.
7.10.2 To clean and examine the clutch, clutch
drum and gearbox
•
Examine the clutch drum for wear.
•
Examine all the parts. Replace parts, if it is
necessary.
•
Examine the clutch and the clutch springs for
damages.
7.10.3 To assemble the clutch, gearbox and clutch
drum
Install the clutch shoes with the text on the clutch shoes
visible.
1. Assemble in the opposite sequence of
disassemble the clutch, clutch drum and gearbox on
page 32 .
34 - Repair instructions
7.11 Cutting equipment
7.11.1 To remove the cutting equipment
1. Disassemble the cutting equipment as shown in
Servicing data on page 6 .
7.11.2 To clean and examine the cutting equipment
1. Clean all parts.
2. Examine the cutting equipment parts for cracks.
3. Examine the sharpness of the blades.
7.11.3 To assemble the cutting equipment
1. Assemble the cutting equipment as shown in
Servicing data on page 6 . Make sure to use the right
type of distance between the blades.
7.12 Cylinder and piston
7.12.1 To prepare to remove the cylinder and
piston
1. Remove the gearbox, the cutting equipment and the
clutch. Refer to
drum and gearbox on page 32 .
Note: Do this step only if it is necessary to also
remove the crankcase.
2. Remove the starter unit. Refer to
the starter unit on page 15 .
3. Remove the flywheel. Refer to
flywheel on page 19 .
Note: Do this step only if it is necessary to also
remove the crankcase.
4. Remove the muffler and the exhaust pipe. Refer to
To disassemble the muffler on page 18 .
5. Remove the air filter. Refer to
air filter on page 18 .
6. Remove the air filter housing and the carburetor.
Refer to
The illustration shows how the product looks before you
start to remove the cylinder and piston.
To
To disassemble the clutch, clutch
To disassemble the
To disassemble the
To disassemble the carburetor on page 27 .
911 - 001 - 15.02.2019
To disassemble
Advertisement
Table of Contents
