b) Clutch side.
7.13.3 To clean and examine the crankcase and
crankshaft
The crankshaft cannot be repaired. Replace it if it is
worn or damaged.
•
Examine the large end of the connecting rod. If there
are marks, discoloration or damaged, replace the
crankshaft.
•
Examine the small end of the connecting rod. If
there are marks or discoloration in the groove of the
bearing, replace the crankshaft.
911 - 001 - 15.02.2019
•
Examine the crankshaft bearing. There must be no
radial play in the connecting rod. Make sure that
there is axial play to sufficiently lubricate the
crankshaft bearing.
•
Examine the crankcase halves for cracks and
damages.
7.13.4 To assemble the crankcase and crankshaft
1. Use a snap ring pliers to attach the snap ring on the
crankcase halves.
a) Flywheel side.
Repair instructions - 43