Cutting Equipment; Cylinder And Piston - Husqvarna 522HD60X Workshop Manual
Hide thumbs
Also See for 522HD60X:
- Operator's manual (229 pages) ,
- Operator's manual (372 pages) ,
- Operator's manual (48 pages)
Table of Contents
Advertisement
7.10.3 To assemble the clutch, gearbox and clutch
drum
Install the clutch shoes with the text on the clutch shoes
visible.
To
1. Assemble in the opposite sequence of
disassemble the clutch, clutch drum and gearbox on
page 36 .
7.11 Cutting equipment
7.11.1 To remove the cutting equipment
1. Disassemble the cutting equipment as shown in
Servicing data on page 6 .
7.11.2 To clean and examine the cutting equipment
1. Clean all parts.
2. Examine the cutting equipment parts for cracks.
3. Examine the sharpness of the blades.
7.11.3 To assemble the cutting equipment
1. Assemble the cutting equipment as shown in
Servicing data on page 6 . Make sure to use the right
type of distance between the blades.
7.12 Cylinder and piston
7.12.1 To prepare to remove the cylinder and
piston
1. Remove the gearbox, the cutting equipment and the
To disassemble the clutch, clutch
clutch. Refer to
drum and gearbox on page 36 .
Note: Do this step only if it is necessary to also
remove the crankcase.
To disassemble
2. Remove the starter unit. Refer to
the starter unit on page 17 .
To disassemble the
3. Remove the flywheel. Refer to
flywheel on page 21 .
Note: Do this step only if it is necessary to also
remove the crankcase.
4. Remove the muffler and the exhaust pipe. Refer to
To disassemble the muffler on page 20 .
To disassemble the
5. Remove the air filter. Refer to
air filter on page 20 .
6. Remove the air filter housing and the carburetor.
To disassemble the carburetor on page 29 .
Refer to
The illustration shows how the product looks before you
start to remove the cylinder and piston.
Repair instructions - 39
Hide quick links:
Advertisement
Table of Contents
