Extended Port; Safety Instructions - Magnimage LED-580F Series User Manual

Extended Port

Port
Extended VGA port
Input
Extended DVI port
port
Extended SDI port
Extended DVI port
Output
Extended VGA port
port
Extended SDI port

Safety Instructions

Please use the correct power supply according that the power input

voltage for this product range is 100～240V AC, 50/60Hz.
When you need connect or pull out any signal or bound guideline. Please

confirm that all the power supply cords have been pulled out ahead.
When you need to add hardware device for the LED video processor,

make sure all of the signals and power cables have been pulled out
ahead.
Before you operate any hardware, please turn off the LED video

processor's power, and to set you on the electrostatic by touching the
ground surfaces.
Please use the processor in clean, dry and ventilated environment, not

use it in the high temperature, humidity environment.
The product is the electronic product; please stay away from the fire,

water and of which is inflammable and blast, dangerous.
This product is with high pressure components, please don't open the

case or maintain it by your own.
As there is exceptional condition with smoke, ill-smelling, please turn off

the switch at once and contact with the dealers.
Model Explanation
LED-580FV Add another VGA input port
LED-580FD Add another DVI input port
LED-580FS Add another SDI input port/loop port
LED-582F Add another DVI 3 and DVI 4 output port
LED-583F Add another VGA and DVI output port
LED-585F Add another SDI output port
6