Single Machine Support Pixel-To-Pixel Mosaic Within 4K - Magnimage LED-580F Series User Manual

2. Secondly, we should confirm the total horizontal output resolution based
on the total width of two panels, then it should be 3640×1040.
Please see below diagram:
DVI1 output
PC input：
1920×1080/60Hz
When use this single machine mosaic, the easiest way is put the wider panel
on the left and the narrow panel on the right.

Single machine support pixel-to-pixel mosaic within 4K

As LED-580F has multi display output function for high output resolution, and
it also supports user-defined output resolution, it can achieve pixel-topixel
mosaic for any resolution within 4K.
In order to achieve pixel-to-pixel display, it needs use " "DP/HDMI"input
function, and set "DP/HDMI" EDID function to make PC output required
resolution, the left steps same as
For example, LED panel 1:1280×1600, LED panel 2: 1024×1600, pls see below
diagram:
1872× 1040
Panel 1: 1872×
1040
LED-580F series processors
(total resolution 3744×1040/60Hz)
"single machine zoom mosaic within
1872× 1040
Panel 2: 1768×
1040
DVI2 output
4K".
46