Table of Contents
Advertisement
Preview Mode
Preview Summarize
When user needs to change the signal which is displaying to new one, we can
preview the new images on another display, and confirm if the new images are
workable, this function called preview.
How to use preview?
Firstly, change the output resolution to 2K x 2K in the list
of"Output
indicators"
（suggest 3840×1080/60Hz）; then enter the "Image switching"sub menu,
select the "Preview mode"function on, then press "TAKE" button in
"FUNCTION" area on front panel, open the TAKE menu, ，it will show the
information of displaying image(PROGRAM) and preview image (PREVIEW),
please see below picture:
Under the TAKE menu, user can switch the signal source for "PREVIEW"
(preview image) by the buttons in "INPUTS" area, when user switch it to the
requested image, press "TAKE" button, change "preview image(PREVIEW)"
to "displaying image (PROGRAM)", the interface will be changed as below:
40
Advertisement
Table of Contents
