Function Area - Magnimage LED-580F Series User Manual

Browse mode
Picture mode
Brightness
Contrast
Color
↖ OK key, press the knob, can switch the two modes ↗
In the browse mode, anti-clockwise "knob", the cursor moved to the above or
the left. Clockwise "knob", the cursor moved to below or right. Put the cursor
to the item need to adjust, press the "knob", or confirm key, namely into set
mode, then anti-clockwise "knob", can reduce the current parameter value.
Clockwise "knob", it can increase the current parameter values. If you want to
continue to set this page other item, please switch back to browse mode. If
you need to return to the higher level menu, please use the return key. If finish
the adjustment, can long press "knob" to back to the default state directly, or
wait for system overtime, automatic return the default state (in some special
interface, the system will not be back to the default state, for example, image
switch fast interface, user mode fast interface, test picture interface, etc.).
FUNCTION area：
There are 8 keys in this area: AUTO, PIP, ASPECT, EFFECT, FREEZE, PRESETS,
BRIGHT and TAKE.
Key Default Menu State
Automatically rectify the image display position when the current input source is
AUTO
VGA.
PIP Open or close the function of PIP
ASPECT Open the interface of aspect ratio, it can adjust the aspect ratio for output window
EFFECT Open the image switching menu, it can adjust the cycle of fade in/fade out
15
Setting mode
Normal
50
50
50
Picture mode
Brightness
Contrast
Color
Normal
50
50
50