Faq - Magnimage LED-580F Series User Manual

FAQ

LED-580F series processors provide abundant function for the customers,
some functions use requires users to have quite a bit of professional
knowledge. When you have problems, can try to timing machines, if cannot
solve it according the following step, please contact with the local agent, or
contact our service department directly. For your safety, do not attempt to
repair the product by yourself.
Phenomenon
No output image and
no display on LCD in
the front panel.
LCD in the front panel
is displaying
information, but no
output image or the
image is not stable
Image display
position deviation
VGA or DVI port
images showed
Check list
Check the power cord

Check the power switch

Check whether properly connected the input

signal and have switched to the corresponding
source (if no signal, the front panel LCD screen
will display no signal, and the machine will
have no image output at the moment)
Check display terminals whether to support

the output resolution and refresh rate of
LED-580F series processors
Check if the brightness and contrast set too

low.
Check whether the user color temperature set

too low.
Check check image 1 and 2 input status,

whether the top picture showed a signal
Try to reset the machine to be the factory

setting by "factory reset" of the "function
Settings" sub menu.
Enter "output Settings" submenu, adjust the

"horizontal position" and "vertical position", till
the image display properly
Check whether the input signal resolution is

accordance with VESA standard.
52