Extended Port; Safety Instructions - Magnimage LED-540 User Manual

Extended Port

Port
Extended DVI Port
Extended HDMI Port
Extended SDI Port
Extended VGA Port

Safety instructions

Please use the correct power supply according that the power input

voltage for this product range is 100～240V AC, 50/60Hz.
When you need connect or pull out any signal or bound guideline. Please

confirm that all the power supply cords have been pulled out ahead.
When you need to add hardware device for the LED video processor,

make sure all of the signals and power cables have been pulled out
ahead.
Before you operate any hardware, please turn off the LED video

processor's power, and to set you on the electrostatic by touching the
ground surfaces.
Please use the processor in clean, dry and ventilated environment, not

use it in the high temperature, humidity environment.
6
Model Explanation
LED-540CD Add another DVI input port
LED-540CH Add another HDMI input port
LED-540CS Add another SDI input/loop port
LED-540CV Add another VGA input port