Table of Contents
Advertisement
Using Menu
Using the menu system can set to this machine convenient and intuitive to
meet the demands of user.
LED-580F series products using a full color LCD screen to display the whole
user menu. If the user does not have operation or operation timeout, the LCD
screen will show the default state. Operate the menu system by using the
knob and keys. The user can check and set its function and states convenient
and intuitive to meet the demands.
We will combine the keys function and LCD screen display, detailed introduces
you to LED-580F series products menu system.
How to use the keys
The front panel keys of LED-58X series products are divided into three areas:
INPUTS, MENU and FUNCTION.
INPUTS area：
This area contains seven keys：AV1, AV2, VGA, DVI, HDMI, DP and E.M.
In the menu system default state, press the keys in this area can switch the
input signal source 1 to the corresponding input port.
MENU area：
This area contains 2 press buttons: a confirmation key(OK), a return key(
)
and a knob which can be pressed. Press the "knob", its function is same as the
confirmation key; long press the "knob", can make the menu system return to
the default state immediately; when to press return key, the menu system may
be back to the higher level menu in turn until returning to the default state. In
the main menu, OK key is also used in the switching between the two modes
below:
14
Advertisement
Table of Contents
