Table of Contents
Advertisement
INPUT area：
This area includes 11 buttons: INPUT 1, INPUT 2, INPUT 3, INPUT 4, INPUT 5
LEFT, INPUT 5 RIGHT, INPUT 6 LEFT, INPUT 6 RIGHT, TILE 1, TILE 2, LOGO.
Among them, INPUT 5 LEFT, INPUT 5 RIGHT, INPUT 6 LEFT, INPUT 6 RIGHT
correspond to the processor's two expanded inputs. DP1.2 and HDMI2.0 will
be divided into left and right parts when using inputting 4K×2K/60Hz input,
which corresponding to the LEFT and RIGHT of the button.
TILE 1 and TILE 2: Quick use Tile signal, specific operating please see Tile Key
configuration menu.
INPUT MUX: Shortcut button to INPUT MUX menu, configure input 1-6
separately (each group use which input port).
LOGO button: Open and close logo function.
When there is a input signal, the corresponding input key turn white. The
currently selected input signal is red.
Select layer first, and then select the input signal.
FUNCTION area：
FUNCTION area includes 9 buttons: FADE OUT, FADE IN, FREEZE, SIZE, TEST
PATTERN, BRIGHT LEVEL, ZOOM, SAVE PRESET and LOAD PRESET.
Buttons
FADE OUT
FADE IN
FREEZE
SIZE
TEST PATTERN
BRIGHT LEVEL
ZOOM
SAVE PRESET
LOAD PRESET
15
Default operation
Fade out the selected layer
Fade in the selected layer
Freeze current image
Enter resize menu interface
Open the test pattern interface
Open the brightness level adjustment interface
Open the layer zoom interface
Enter the preset interface to save presets
Enter the preset interface to load presets
Advertisement
Table of Contents
