Network Test; About; Exit - LAUNCH TECH X-431 PRO MINI User Manual

LAUNCH
tap "Printing test" to test the printing.
Now you can use the Wi-Fi printer to print!
If the printer is not found, please reset the printer to default factory settings (refer
to Step 2 for details) and check whether the current device and the printer are on
the same LAN.
B. If you have configured the Wi-Fi printer to the LAN:
2. Tap "Connect to Printer":
a). If the local network remains as it is, tap "Test Print" directly to test the
printing.
b). If the local network changes, you have to reset the Wi-Fi printer.

4.10.4 Network test

It enables you to test whether the current network environment is good or not. It
is normal that you may encounter a logout while testing.

4.10.5 About

The software version information and disclaimer are included.

4.10.6 Exit

This option allows you to logout the system.
To logout the current user ID, tap "Exit from current account".
X-431 PRO MINI User Manual
Fig. 4-24
30