Bluetooth Setting; Start Diagnosing - LAUNCH TECH X-431 PRO MINI User Manual

Table of Contents

LAUNCH

B. Battery Clamps Cable: Connect one end of the battery clamps cable to

vehicle's battery, and the other end to the power jack of OBD I adaptor.

4.4 Bluetooth Setting

Enter X-431 PRO MINI Bluetooth setting screen ("Settings" --> "Bluetooth"),

slide the Bluetooth switch to ON and X-431 PRO MINI will start searching

available Bluetooth device, tap the desired connector to pair.

By default, the Bluetooth name is 98639*****00 (where ***** stands for 5 digits.).

Note: In case no Bluetooth setting is done before diagnostic software is launched,

you can also configure it while using the software. For details on Bluetooth connection,

please refer to Chapter 4.5 "Start diagnosing".

Tap "Tradition Diagnose" to enter the vehicle selection page.

2 approaches are provided for you to access the vehicle diagnostic software.

Choose any one of the following ways:

1. VINSCAN enables you to access it more quickly.

In this case, automatic scan (OBD VIN) and manual input (INPUT VIN) are

X-431 PRO MINI User Manual

Fig. 4-11

Fig. 4-12

Table of Contents

Mid6901