Reflection light beam switch with polarisation filter (2 pages)
Summary of Contents for Pepperl+Fuchs SI00114O-H
Page 1
ATEX: II 1/2G Ex db IIC T6...T4 Ga/Gb IECEx: Ex db IIC T6...T4 Ga/Gb SI00114O-H DE – Sicherheitshinweise für elektrische Betriebsmittel für explosionsgefährdete Bereiche, siehe Seite 5 EN – Safety instructions for electrical apparatus for explosion- hazardous areas, see page 11 FR –...
Page 2
Declaración UE de conformidad oświadcza, że produkt ten jest zgodny z obowiązującą Europejską Dyrektywą. Por la presente declaración y la inclusión de la marca CE, el fabricante Pepperl+Fuchs, Zastosowane wytyczne, normy oraz dukumenty podane są w deklaracji zgodności. declara que el producto cumple con las directivas europeas pertinentes. Las directivas, normas y documentos de aplicación se indican en la declaración de conformidad.
Page 3
Signatures / Unterschriften Declaration of conformity / Konformitätserklärung Mannheim, 2018-09-27 We, Pepperl+Fuchs GmbH declare under our sole responsibility that the products listed below are in conformity with the listed European Direc- tives and standards. ppa. Lutz Liebers i.V. Martin Holdefer Die Pepperl+Fuchs GmbH erklärt hiermit in alleiniger Verantwortung,...
Vibracon LVL-M2C SI00114O-H Associated This document is an integral part of the following documents: KA00162O documentation The documents which are supplied and correspond to the device type apply. Supplementary Explosion protection compendium documentation Manufacturer's EU-Declaration of conformity certificates see page 3...
• Modifications to the device can affect the explosion protection and must be carried out by staff authorized to perform such work by Pepperl+Fuchs. • Only open the device under one of the following conditions: 17 minutes have elapsed since the...
Vibracon LVL-M2C SI00114O-H Safety instructions: Permitted ambient temperature range at the electronics housing: Observe the information in the Special conditions temperature tables. • Sensors coated with a non-conductive material can be used in gases of Group IIC if avoiding electrostatic charging (e.g. through friction, cleaning, maintenance, strong medium flow). These sensors are marked by the warning sign "Avoid Electrostatic Charge".
Vibracon LVL-M2C SI00114O-H • Before operation: – Screw in the cover all the way. – Tighten the securing clamp on the cover. • In potentially explosive atmospheres: – Do not disconnect the electrical connection of the power supply circuit when energized.
Vibracon LVL-M2C SI00114O-H Temperature tables Device type LVL-M2C Temperature class Process temperature T (process): Ambient temperature T (ambient): Sensor Electronics -50 °C to +75 °C -60 °C to +70 °C Covers with glass window: -50 °C to +70 °C -50 °C to +90 °C -60 °C to +70 °C...
Page 11
With regard to the supply of products, the current issue of the following document is applicable: The General Terms of Delivery for Products and Services of the Electrical Industry, published by the Central Association of the "Elektrotechnik und Elektroindustrie (ZVEI) e.V." including the supplementary clause: "Erweiterter Eigentumsvorbehalt".
Page 12
PROTECTING YOUR PROCESS Worldwide Headquarters Pepperl+Fuchs GmbH 71354513 68307 Mannheim · Germany Tel. +49 621 776-0 SI00114O-H/98/A3/15.16 E-mail: info@de.pepperl-fuchs.com FM7.2 For the Pepperl+Fuchs representative closest to you check www.pepperl-fuchs.com/pfcontact www.pepperl-fuchs.com DOCT-0561B 114162 Subject to modifications 10/2018 Copyright Pepperl+Fuchs • Printed in Germany...
Need help?
Do you have a question about the SI00114O-H and is the answer not in the manual?
Questions and answers