Disposal Of Used Consumables; Disposal; Checking For Clogged Nozzles; Ways To Check For Clogs - Epson SureColor SC-F9330 Series User Manual

Hide thumbs Also See for SureColor SC-F9330 Series:
Table of Contents

Advertisement

SC-F9300 Series
User's Guide
c
Important:
If hooked sections are not positioned correctly,
return to Step 3 to attach them again.
Otherwise, the head may be damaged.
F
While holding the tabs of each media edge plate
on both sides, move both the plates to the left and
right edges of the platen respectively.
Releasing the tab fixes the media edge plate.
G
Close the left maintenance cover and front cover.
Disposal of used
consumables

Disposal

The following used parts with adhered ink are classified
as industrial waste.
❏ Cleaning stick
❏ Clean-room wiper
❏ Ink cleaner
❏ Waste ink
❏ Waste Ink Bottle
❏ Wiper unit
❏ Flushing pad
❏ Media after printing
Maintenance
Dispose of items according to local laws and regulations.
For example, contract a industrial waste disposal
company for disposal. In such cases, submit the "Safety
data sheet" to the industrial waste disposal company.
You can download it at your local Epson Web site.
Checking for clogged
nozzles
We recommend that you check the nozzles for clogs
each time you print to ensure quality results.

Ways to Check for Clogs

The following are 2 ways to check for nozzle clogs.
On-Demand Nozzle Pattern
When you want to check that there is no clogging or
stripes and unevenness in print results before printing,
print a nozzle check pattern. Inspect the printed check
pattern visually to determine whether the nozzles are
clogged.
See the following for details.
"Printing nozzle check patterns" on page 81
U
Depending on the width of the loaded media, you can
save media by printing additional test patterns in the
space beside an existing pattern:
❏ If the width is equal to or greater than 51 inches but
less than 64 inches, up to three patterns can be
printed (one on the left, one in the center, and one
on the right).
❏ If the width is equal to or greater than 34 inches but
less than 51 inches, up to two patterns can be
printed (one on the left and one on the right).
❏ Patterns cannot be printed side-by-side if the media
is less than 34 inches wide or if Media Size Check is
set to Off.
80

Advertisement

Table of Contents
loading

Table of Contents