Table of Contents
Advertisement
SC-F9300 Series
User's Guide
Item
Sleep Mode
Charge Settings
Using the Control Panel Menu
Parameter
Explanation
15 to 240 minutes
The printer enters sleep mode when no errors are detected and no print
*
jobs have been received for a specific time. In sleep mode, all heaters turn
(15
)
off, the control panel turns off, and the internal motors and other
components consume less power.
To reactivate the control panel display, press any button in the control
panel except P. The control panel display will however turn off again if no
operations are performed for another 30 seconds under these conditions.
The printer and heaters are only fully reactivated when a print job is
received, the media loading lever is used, or another operation involving
printer hardware is performed.
To return from sleep mode and begin prehearing the heater immediately,
press the button, and perform Start Preheat.
102
Advertisement
Table of Contents
