Table of Contents
Advertisement
SC-F9300 Series
User's Guide
1 Status indicators
The status of the Waste Ink Bottle is shown as
follows.
: No error. The indicator changes to
show the amount of space available.
: The Waste Ink Bottle is almost full.
Ready a new Waste Ink Bottle.
: The Waste Ink Bottle is full. Replace
with a new Waste Ink Bottle.
G
Status of the head cleaning set
The guideline for replacement of the head cleaning
set is displayed.
: As the time for replacement gets closer,
the indicator gradually decreases.
H
Notice regarding when to do periodic/auto
cleaning
Notices for when periodic cleaning or auto cleaning*
are to occur are displayed as shown below.
The times these are done change greatly depending
on the ambient temperature of the print heads. In
addition, auto cleaning may be done regardless of the
notice display when the power is turned back on.
** H** M
: This appears 24 hours prior to
when auto cleaning and periodic
cleaning are to be done (when the
interval is set in Printing Time).
*** m
: This appears 20 minutes prior to
when periodic cleaning is to be
done (when the interval is set in
Media Usage).
If you want to print, even though it is almost time for
head cleaning to be done, implementing Preventive
Cleaning in the settings menu in advanced is effec‐
tive at keeping printing from being interrupted mid‐
way.
"The Maintenance Menu" on page 104
U
* Auto cleaning is head cleaning that the printer automatically
does after a set period of time has passed to keep the print
heads in good condition.
Introduction
Features
This large-format color ink jet printer supports roll
media 1626 mm (64 inches) in width. The main features
of this printer are described below.
Realizing High Productivity
Improved Drying Performance Thanks to Built-in
Heater
The heater can dry the ink almost instantaneously,
which improves the print quality and productivity.
Media Feeding Unit Accommodates up to 45 kg Rolls
The Media Feeding Unit can handle high-capacity rolls
with external diameters of up to 250 mm and weights of
up to 45 kg ensuring that media requires less frequent
replacement.
Auto Take-up Reel Unit Comes Standard
The auto take-up reel unit automatically takes up
printed media cleanly, with no wrinkles. Achieving
high-volume printing and continuous nighttime
printing with the high-precision take-up necessary to
support continuous-type sublimation transfer printers.
Large-Capacity Ink Tank Installed
A large-capacity ink tank is installed to achieve high
productivity. The ink pack refills are also available in
large volumes of 1000 ml. You won't be troubled by
frequently replacing ink cartridges.
High-Speed Printing
A 2-head stagger configuration allows for high-speed
printing. Moreover, there are two ink tanks equipped
per color to support high-speed printing.
Superior Ease of Use
Media Installation and Take up a Snap
The roll and roll core holders require no spindles,
eliminating the need to attach spindles before installing
media. Just bring the media to the printer and install it
directly. Never having to juggle long spindles makes
installing media a snap even where space is limited.
16
Advertisement
Table of Contents
