Table of Contents
Advertisement
SC-F9300 Series
User's Guide
Ink other than High Density Black Ink
High Density Black Ink
c
Important:
Press the ink inlet cap down firmly so that it
does not detach. If the slider comes into contact
with the ink inlet cap when pulling it out, the
cap could be damaged.
Maintenance
M
Close the slider ink inlet cover.
When ink adheres to the heat shield when refilling
the ink, remove the heat shield and clean it.
"Cleaning the Heat Shield" on page 83
U
Procedure for stirring the
High Density Black Ink
A characteristic of High Density Black Ink is that
sedimentation occurs easily. Stir the ink in the ink tank
once a week. There may be color differences in the
printouts if printing is performed when sedimentation
has occurred.
You can stir the ink whenever you want, regardless if
you are printing or if the printer is on or off.
Before starting this procedure, be sure to read the
following:
"Precautions regarding maintenance" on page 59
U
71
Advertisement
Table of Contents
