JUKI APW-895NE Instruction Manual page 67

② Items that are displayed in the sewing data list screen
No.
Flap priority sewing selection
Flap priority sewing mode is selected.
* It is possible to set only when alternate sewing mode is set.
Flap priority sewing pro-
hibited
Selection of automatic changeover of marking light irradiation position
When is sewing start irradiation or sewing end irradiation, the marking
irradiation position is automatically changed over after end of sewing.
* This function does not move at the time of alternate sewing mode and
cycle sewing mode.
Stop
Flap forced stop data
When flap sewing end is not detected, the machine stops after sewing as
long as the set length from rear reference position.
* It is possible to set only when
Lockstitch pitch
Sewing pitch of lockstitch section is set.
Selection of condensation/back tack at sewing start
Condensation/back tack at sewing start is selected.
Condensation
Number of condensation stitches at sewing start
Number of condensation stitches at sewing start is set.
* It is possible to set only when
Condensation pitch at sewing start
Condensation sewing pitch at sewing start is set.
* It is possible to set only when
First stitch pitch of condensation sewing at sewing start
First stitch pitch of condensation sewing at sewing start is set.
* It is possible to set only when
* It is possible to set only when
back tack detailed setting.
※ . . . Item that is not displayed due to other setting state
△ . . . . The item which is not used in the standard condition of the APW-895NE.
Item
Flap priority sewing
mode
Motion
is set to flap sewing.
Back tack
is set to selection of condensation.
is set to selection of condensation.
is set to selection of condensation.
is set to selection of condensation/
− 51 −
Setting range
/ Initial value
Edit unit
- - -
- - -
0.0 to 10.0 5.0mm
/
0.1mm
2.0 to 3.4 2.5mm
/
0.1mm
- - -
3 to 19 5 stitches
/
1 stitch
0.5 to 1.5 1.0mm
/
0.1mm
0.1 to 1.5 1.0mm
/
0.1mm
※
△
※
※
△
※
※
※