Https Example - ZyXEL Communications WAC6000 Series Manual

The following table describes the labels in this screen.
Table 66 Configuration > System > WWW > Service Control
LABEL
HTTPS
Enable
Server Port
Authenticate Client
Certificates
Server Certificate
Redirect HTTP to
HTTPS
HTTP
Enable
Server Port
Apply
Reset

12.4.5 HTTPS Example

If you haven't changed the default HTTPS port on the NWA/WAC, then in your browser enter
"https://NWA/WAC IP Address/" as the web site address where "NWA/WAC IP Address" is the IP
address or domain name of the NWA/WAC you wish to access.
12.4.5.1 Internet Explorer Warning Messages
When you attempt to access the NWA/WAC HTTPS server, you will see the error message shown in
the following screen.
Chapter 12 System
DESCRIPTION
Select the check box to allow or disallow the computer with the IP address that
matches the IP address(es) in the Service Control table to access the NWA/WAC
Web Configurator using secure HTTPs connections.
The HTTPS server listens on port 443 by default. If you change the HTTPS server port
to a different number on the NWA/WAC, for example 8443, then you must notify
people who need to access the NWA/WAC Web Configurator to use "https://NWA/WAC
IP Address:8443" as the URL.
Select Authenticate Client Certificates (optional) to require the SSL client to
authenticate itself to the NWA/WAC by sending the NWA/WAC a certificate. To do that
the SSL client must have a CA-signed certificate from a CA that has been imported as
a trusted CA on the NWA/WAC.
Select a certificate the HTTPS server (the NWA/WAC) uses to authenticate itself to the
HTTPS client. You must have certificates already configured in the My Certificates
screen.
To allow only secure Web Configurator access, select this to redirect all HTTP
connection requests to the HTTPS server.
Select the check box to allow or disallow the computer with the IP address that
matches the IP address(es) in the Service Control table to access the NWA/WAC
Web Configurator using HTTP connections.
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service to access the NWA/WAC.
Click Apply to save your changes back to the NWA/WAC.
Click Reset to return the screen to its last-saved settings.
NWA5000 / WAC6000 Series User's Guide
136