Https Example - ZyXEL Communications NWA Series User Manual

Figure 107 Configuration > System > WWW > Service Control
The following table describes the labels in this screen.
Table 79 Configuration > System > WWW > Service Control
LABEL
HTTPS
Enable
Server Port
Authenticate Client
Certificates
Server Certificate
Redirect HTTP to HTTPS
HTTP
Enable
Server Port
Apply
Reset

17.5.5 HTTPS Example

If you have not changed the default HTTPS port on the Zyxel Device, then in your browser enter "https://
Zyxel Device IP Address/" as the web site address where "Zyxel Device IP Address" is the IP address or
domain name of the Zyxel Device you wish to access.
Chapter 17 System
DESCRIPTION
Select the check box to allow or disallow the computer with the IP address that matches
the IP address(es) in the Service Control table to access the Zyxel Device Web
Configurator using secure HTTPs connections.
The HTTPS server listens on port 443 by default. If you change the HTTPS server port to a
different number on the Zyxel Device, for example 8443, then you must notify people who
need to access the Zyxel Device Web Configurator to use "https://Zyxel Device IP
Address:8443" as the URL.
Select Authenticate Client Certificates (optional) to require the SSL client to authenticate
itself to the Zyxel Device by sending the Zyxel Device a certificate. To do that the SSL client
must have a CA-signed certificate from a CA that has been imported as a trusted CA on
the Zyxel Device.
Select a certificate the HTTPS server (the Zyxel Device) uses to authenticate itself to the
HTTPS client. You must have certificates already configured in the My Certificates screen.
To allow only secure Web Configurator access, select this to redirect all HTTP connection
requests to the HTTPS server.
Select the check box to allow or disallow the computer with the IP address that matches
the IP address(es) in the Service Control table to access the Zyxel Device Web
Configurator using HTTP connections.
You may change the server port number for a service if needed, however you must use
the same port number in order to use that service to access the Zyxel Device.
Click Apply to save your changes back to the Zyxel Device.
Click Reset to return the screen to its last-saved settings.
NWA/WAC/WAX Series User's Guide
177