7.1 Overview
This chapter describes how to set up user accounts and user settings for the NWA/WAC.
7.1.1 What You Can Do in this Chapter
• The User screen (see
• The Setting screen (see
settings, and other user settings for the NWA/WAC.
7.1.2 What You Need To Know
The following terms and concepts may help as you read this chapter.
User Account
A user account defines the privileges of a user logged into the NWA/WAC. User accounts are used in
controlling access to configuration and services in the NWA/WAC.
User Types
These are the types of user accounts the NWA/WAC uses.
Table 37 Types of User Accounts
TYPE
Admin Users
admin
limited-admin
Access Users
user
Note: The default admin account is always authenticated locally, regardless of the
authentication method setting.
Section 7.2 on page
Section 7.3 on page
ABILITIES
Change NWA/WAC configuration (web, CLI)
Look at NWA/WAC configuration (web, CLI)
Perform basic diagnostics (CLI)
Used for the embedded RADIUS server and
SNMPv3 user access
Browse user-mode commands (CLI)
NWA5000 / WAC6000 Series User's Guide
80
C
H A PT ER
81) provides a summary of all user accounts.
83) controls default settings, login settings, lockout
LOGIN METHOD(S)
WWW, TELNET, SSH, FTP
WWW, TELNET, SSH
7
User