ZyXEL Communications WAC6000 Series Manual page 160

Table 75 Configuration > Log & Report > Log Setting > Edit System Log Setting (continued)
LABEL
SSL/TLS
Encryption
Mail Server Port
Mail Subject
Send From
Send Log To
Send Alerts To
Sending Log
Day for Sending
Log
Time for Sending
Log
SMTP
Authentication
User Name
Password
Active Log and Alert
System log
E-mail Server 1
Chapter 13 Log and Report
DESCRIPTION
Select SSL/TLS to use Secure Sockets Layer (SSL) or Transport Layer Security
(TLS) if you want encrypted communications between the mail server and the NWA/
WAC.
Select STARTTLS to upgrade a plain text connection to a secure connection using
SSL/TLS.
Select No to not encrypt the communications.
Enter the same port number here as is on the mail server for mail traffic.
Type the subject line for the outgoing e-mail.
Type the e-mail address from which the outgoing e-mail is delivered. This address is
used in replies.
Type the e-mail address to which the outgoing e-mail is delivered.
Type the e-mail address to which alerts are delivered.
Select how often log information is e-mailed. Choices are: When Full, Hourly and
When Full, Daily and When Full, and Weekly and When Full.
This field is available if the log is e-mailed weekly. Select the day of the week the log
is e-mailed.
This field is available if the log is e-mailed weekly or daily. Select the time of day
(hours and minutes) when the log is e-mailed. Use 24-hour notation.
Select this check box if it is necessary to provide a user name and password to the
SMTP server.
This box is effective when you select the SMTP Authentication check box. Type the
user name to provide to the SMTP server when the log is e-mailed.
This box is effective when you select the SMTP Authentication check box. Type the
password to provide to the SMTP server when the log is e-mailed.
Use the System Log drop-down list to change the log settings for all of the log
categories.
disable all logs (red X) - do not log any information for any category for the system
log or e-mail any logs to e-mail server 1 or 2.
enable normal logs (green check mark) - create log messages and alerts for all
categories for the system log. If e-mail server 1 or 2 also has normal logs enabled,
the NWA/WAC will e-mail logs to them.
enable normal logs and debug logs (yellow check mark) - create log messages,
alerts, and debugging information for all categories. The NWA/WAC does not e-mail
debugging information, even if this setting is selected.
Use the E-Mail Server 1 drop-down list to change the settings for e-mailing logs to
e-mail server 1 for all log categories.
Using the System Log drop-down list to disable all logs overrides your e-mail server
1 settings.
enable normal logs (green check mark) - e-mail log messages for all categories to
e-mail server 1.
enable alert logs (red exclamation point) - e-mail alerts for all categories to e-mail
server 1.
NWA5000 / WAC6000 Series User's Guide
160