Table of Contents
Advertisement
Table 7 WAC6103D-I LEDs (continued)
LED
WLAN
WLAN
UPLINK
LAN
Locator
1.6.3 NWA5301-NJ
The LEDs automatically turn off when the NWA5301-NJ is ready. You can press the LED ON button
for one second to turn on the LEDs again. The LEDs will blink and turn off after two minutes.
Chapter 1 Introduction
COLOR
STATUS
Green
On
Blinking
Amber
On
Blinking
Off
Green
On
Blinking
Amber
On
Blinking
Off
Amber/
On
Green
Blinking
Off
Amber/
On
Green
Blinking
Off
White
Blinking
Off
NWA5000 / WAC6000 Series User's Guide
DESCRIPTION
The antenna switch is set to "Ceiling" for the radio.
The 2.4 GHz WLAN is active.
The antenna switch is set to "Ceiling" for the radio.
The 2.4 GHz WLAN is transmitting or receiving data.
The antenna switch is set to "Wall" for the radio.
The 2.4 GHz WLAN is active.
The antenna switch is set to "Wall" for the radio.
The 2.4 GHz WLAN is transmitting or receiving data.
The 2.4 GHz WLAN is not active.
The antenna switch is set to "Ceiling" for the radio.
The 5 GHz WLAN is active.
The antenna switch is set to "Ceiling" for the radio.
The 5 GHz WLAN is transmitting or receiving data.
The antenna switch is set to "Wall" for the radio.
The 5 GHz WLAN is active.
The antenna switch is set to "Wall" for the radio.
The 5 GHz WLAN is transmitting or receiving data.
The 5 GHz WLAN is not active.
Amber - The port is operating as a 100-Mbps
connection.
Green - The port is operating as a Gigabit connection
(1000 Mbps).
The WAC is sending/receiving data through the port.
The port is not connected.
Amber - The port is operating as a 100-Mbps
connection.
Green - The port is operating as a Gigabit connection
(1000 Mbps).
The LAN port is sending/receiving data through the
port.
The LAN port is not connected.
The Locator is activated and will show the actual
location of the WAC between several devices in the
network.
The Locator function is off.
24
Advertisement
Table of Contents
Troubleshooting
