Table of Contents
Advertisement
5. Inspect the drain plug seal and replace it if it is damaged. Lubricate the
seal on the drain plug with oil and install. Tighten to the specified torque.
Description
Drain plug
FILLING THE CRANKCASE WITH OIL
IMPORTANT: Do not try to fill the oil level to the top of the operating range
(upper hole). The oil level is correct as long as it appears in the operating range
between the upper and lower hole.
1. Position the outboard in a level operating position.
2. Remove the oil fill cap and add the recommended oil to the midpoint of
the oil level operating range, as indicated on the dipstick. Adding
approximately 1.8 liter (1.9 U.S. quart) of oil to an empty crankcase will
bring the oil level to the midpoint of the oil level range.
eng
MAINTENANCE
74050
97
4537
Nm
lb‑in.
24.0
–
lb‑ft
17.7
Hide quick links:
Advertisement
Table of Contents
