Mercury GO BOLDLY 25 EFI Operation, Maintenance And Installation Manual page 88

Table of Contents

Advertisement

4. Verify the shift handle is in the neutral (N) position.
5. Verify the throttle grip is set to the idle position.
6. Manual starting models ‑ Pull the starter rope slowly until you feel the
starter engage, then pull rapidly to crank the engine. Allow rope to return
slowly. Repeat until the engine starts.
IMPORTANT: Outboards with battery charging capabilities must not be
operated with battery cables disconnected from the battery. Damage to the
charging system may result.
7. Electric starting models ‑ Turn the ignition key to crank the engine.
Release the key when the engine starts. Do not operate the starter motor
continuously for longer than ten seconds at a time. If the engine fails to
start, wait 30 seconds and try again.
OPERATION
N
F
78
R
74495
63086
74503
eng

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents