Table of Contents
Advertisement
INSTALLING THE OUTBOARD ON THE TRANSOM (MANUAL TILT
MODELS)
Failure to correctly fasten the outboard could result in the outboard propelling
off the boat transom resulting in property damage, serious injury, or death.
Before operation, the outboard must be correctly installed with the required
mounting hardware.
This product must be secured to the transom with the required mounting
hardware. If the outboard strikes an under water object, the required mounting
hardware prevents the outboard from propelling off the transom. A decal on the
swivel bracket reminds the installer of the potential hazard.
IMPORTANT: Models not equipped with power trim or gas assist must have the
transom clamps contacting the top of the transom and the clamp screws
tightened, prior to drilling the mounting bolt holes through the transom.
1. Place the outboard on the centerline of the transom.
eng
INSTALLATION
WARNING
!
WARNING
Avoid serious injury
or death. Secure
engine to transom
with bolts.
37-896853-007
29
52375
27005
Hide quick links:
Advertisement
Table of Contents
