Table of Contents
Advertisement
A+ Server AS -1024US-TRT User's Manual
1.4 Chassis Features
Control Panel
Power switches and status LEDs are located on the control panel on the front of the chassis.
8
Item
Features
1
Power button
2
Reset button
3
Power LED
4
HDD
5
NIC LED
6
NIC LED
7
Information LED Alerts operator to several states, as noted in the table below
8
UID Button
Status
Continuously on and
red
Blinking red (1Hz)
Blinking red (0.25Hz)
Solid blue
Blinking blue
7
6
5
4
Figure 1-1. Control Panel
Control Panel Features
Description
The main power switch applies or removes primary power from the power supply to
the server but maintains standby power.
Reboots the system.
Indicates power is being supplied to the system power supply units. This LED is
illuminated when the system is operating normally.
Indicates activity on the storage drive when flashing
Indicates network activity on the LAN1 when flashing.
Indicates network activity on the LAN2 when flashing.
Unit identifier button illuminates the Information LED
Information LED
Description
An overheat condition has occurred.
(This may be caused by cable congestion.)
Fan failure, check for an inoperative fan.
Power failure, check for a non-operational power
supply.
UID has been activated locally to locate the
server in a rack environment.
UID has been activated using IPMI to locate the
server in a rack environment.
3
2
10
1
Advertisement
Table of Contents
