Chassis Components; Storage Drives - Supermicro AS-1024US-TRT User Manual

A+ Server AS -1024US-TRT User's Manual

3.4 Chassis Components

This section provides instructions on installing and replacing system components. To assure
compatibility, only use components that match the specifications or part numbers given.
Installation or replacement of most components require that power first be removed from the
system.

Storage Drives

The system supports four 3.5" storage drives. Standard drives are SATA but can support
NVMe or SAS with the appropriate optional kits.
The drives are mounted in drive carriers that simplify their removal from the chassis. These
carriers also help promote proper airflow.
Drive Carrier Indicators
Each drive carrier has two LED indicators: an activity indicator and a status indicator. In
RAID configurations, the status indicator lights to indicate the status of the drive. In non-RAID
configurations, the status indicator remains off. See the table below for details.
Color
Activity
Blue
LED
Blue
Status
Red
LED
Red
Red
Red
Red
Green
Amber
Note: Enterprise level drives are recommended. For information, visit
com/en/Aplus/system/1U/1024/AS-1024US-TRT.cfm.
Drive Carrier LED Indicators
Blinking Pattern Behavior for Device
Solid On SAS/NVMe drive installed
Blinking I/O activity
Solid On Failure of drive with RSTe support
Blinking at 1 Hz Rebuild drive with RSTe support
Blinking with two blinks Hot spare for drive with RSTe support
and one stop at 1 Hz
On for five seconds, Power on for drive with RSTe support
then off
Blinking at 4 Hz Identify drive with RSTe support
Solid On Safe to remove NVMe device
Blinking at 1 Hz Attention state—do not remove NVMe device
38
https://www.supermicro.