Maintenance - Hyundai HYM510SP User Manual

7. MAINTENANCE

WARNING
NEVER touch a rotating blade.
Always stop the engine and unplug the spark plug before doing any repairs or
maintenance.
Check regularly the oil level and keep it to the recommended level as required.
Frequently check the lawnmower and ensure that all grass deposits are removed
from beneath the deck.
Lubricate the wheel bearings with a suitable lubricant.
Check the blade, in order to obtain a good cut, the blade should always be sharp and
well balanced. At regular intervals, check the tightness of all nuts, bolts and screws.
If the blade hits an obstacle check for damage and if the machine vibrates badly stop
the lawnmower and take it to a service dealer.
CAUTION
Always refuel in a well-ventilated area with the engine off.
Whilst carrying out maintenance you must wear appropriate Personal Protective
Equipment (PPE) when using this machine.
Suggested PPE Sturdy footwear, work gloves (especially when working near blade),
long trousers and hearing protection.
THE BLADE
6.0 The blade. You MUST wear gloves to protect your hands from being cut when
working with the blade.
6.1 The blade is made of pressed steel, in order to obtain a good cut sharpen the blade
frequently, typically around every 25 hours of work.
6.2 Following blade sharpening you must make sure that the blade is always well
balanced.
6.3 To remove the blade, unscrew the bolt, check the blade carrier and all components,
replace if they are worn or damaged.
19